ELIMINATE GREEN & CLOUDY POOL WATER

Buy The #1 All Natural Swimming Pool & Spa Formula Since 1977!

Imagine Having The Best Swimming Pool In Your Neighbourhood.

CLEAN + CLEAR: The ONLY Formula You Will Ever Need To Maintain Your Pool.

Formulated in 1977, CLEAN + CLEAR MINERALS is the original mineral formula for the natural treatment of in-ground pools, above ground pools, hot tubs, and spas.

CLEAN + CLEAR MINERALS and chlorine are the only two products you will ever need to maintain your pool. It's is available in two convenient sizes, 1 KG and 3 KG. Whether you have an in-ground pool, above ground pool or hot tub/spa. CLEAN + CLEAR MINERALS is your D.I.Y. pool treatment and maintenance formula. The Quick Guide D.I.Y chart lets you quickly determine how much you need.

WATCH HOW CLEAN + CLEAR WORKS

OPEN YOUR POOL IN 5 EASY STEPS.

Ensure pump & filter are working properly, balance pH to 7.2pH, total alkalinity to 120 ppm & chlorinated pool water to 3 - 5 ppm.

As a minimum treatment: Add 57g ( 2 oz ) of CLEAN + CLEAR MINERALS per 4500 L (1000 gal) of pool water, which will result in a minimum concentration of 0.5 ppm copper.

Distribute CLEAN + CLEAR MINERALS by sprinkling across pool water surface, every meter or so around the perimeter of the pool, avoiding the coping and any stairs.

Run the filter overnight.

The next day backwash the filter, vacuum the pool and then backwash the filter a second time. (For cartridge filters remove and clean). Repeat this procedure every second day until pool water is clean + clear.

This procedure could take up to a week depending on the condition of the water. Then return the filter and resume your normal operating schedule. Time may be reduced to 8-12 hours per day, depending on the condition of the water. During days with high temperatures and heavy pool use, you should run the filter 24 hours a day, and you may need to increase use of sanitizer.

CLOSE YOUR POOL IN 5 EASY STEPS.

One week before closing your pool for the season, add 28g (1oz) of CLEAN + CLEAR MINERALS per 4500 L (1000 gal) of water.

Distribute CLEAN + CLEAR MINERALS by sprinkling across pool water surface, avoiding the coping and any stairs

Run the filter overnight, and the next day backwash the filter, vacuum the pool and then backwash a second time (for cartridge filter remove and clean).

Return the filter and resume your normal operating schedule. On the day of the pool closing, drain the pool to return jets.

Cap off all the lines and then winterize the pool by adding 10-20 litres of liquid chlorine and cover for the winter (no closing kits are required with the use of CLEAN + CLEAR MINERALS).

Frequently Asked Questions.